Ideas

10 Tips To Ensure Beautiful Embroidery On T Shirts


You may have observed embroidery design on various things such as pillows, curtains, quilts, t-shirt, pullover, etc. In short, embroidery designs are available all around. The professionals can create any design on any apparel.

When it comes to creating beautiful embroidery designs on t-shirts, there are various important things that you need to consider. A T-shirt may be one of the most efficiently utilized items in the wardrobe.

Ensure Good Quality
If you want that your embroidery design shines on your t-shirt, you should purchase t-shirts with good quality fabric. Usually, the t-shirts with heavier cotton blend stitch properly and efficiently on your lightweight t-shirts. The embroidery design on these kinds of t-shirt will not pucker.

Pre-wash
Sometimes, no-shrink cotton clothing starts shrinking after washing. Therefore, it is recommended that you should embroider your t-shirt after washing it. You should properly wash and dry the t-shirt. If you forget to wash your t-shirt and unfortunately it starts shrinking after creating an embroidery design, then even the best design will pucker. Thus, you should consider pre-washing your t-shirt before start creating an embroidery design.

Properly Stabilize
The key rule of stabilizing cloth to start the embroidery process is that if you wear it, don’t tear it. It is recommended that you should use a cut-away stabilizer. We recommend you choose a fusible no-show mesh stabilizer. The stabilizer will help in keeping the knit from stretching out of shape.

Ultimately, a stabilizer helps you to get the desired results. You should turn the right side of the shirt and determine the center point. Now, hoop your stabilized t-shirt. Make sure that your t-shirt is properly inserted inside the hoop and it should not be pulled from the circumference of the stabilizer.

Use Appropriate Needle And Thread
If you want to have a beautiful design on your t-shirt, you must have an appropriate needle and thread. You should use ballpoint needles, especially if you are creating embroidery designs on your t-shirts or sweatshirts. You should use a small size needle to complete your job.

The professionals recommend using 70/10 needles to create light knits and 80/12 for knitting on sweatshirts. Shirts and sweatshirts are often washed and they undergo a huge amount of wear and tear. When it comes to choosing thread for shirts, you should choose the polyester thread. It is so because the polyester thread does not fade. Also, it is bleach resistant.

Choose Simple And Beautiful Design
As you are creating embroidery designs with your hands, therefore, you should choose simple and beautiful designs. It is difficult to create a complicated design with your hands. Now, with the advancement in technology, various new embroidery machines have been introduced.

The latest technology embroidery machines can create beautiful and complicated designs. You just need to use a digitized version of the embroidery design. You can create a digital file of embroidery design by hiring a professional or you can easily find it online such as Carolina panther embroidery design. The embroidery design creates by machines does not pucker.

6. Incorporate A Topper
If you want to get perfect embroidery knits, you should use a water-soluble topper. You should consider placing a very thin layer of water-soluble film. You have to place this topper only in the embroidery area. The topper helps to keep your thread in right place and you will get professional results. After finishing, you should remove the excess amount of topper or rinse it off.

7. Baste in the hoop
Some stabilizers offer a basting stitch. If your stabilizer has it, you should consider using this stitch. This stitch will help to keep the water-soluble topping at its accurate place. The stabilizer will stop any shift in the embroidery design.

8. Test before Start
You should test your stitch before start making the embroidery design on your t-shirt. You can use your old t-shirt for testing purposes. But, the weight of your old-stained should be similar to that of the new t-shirt on which you want to create an embroidery design.

You should keep testing your stitches until you get the desirable one. You can create various designs by using needle and thread. If you want to create a design with an embroidery machine, then it is recommended to choose a wonder woman embroidery design for a girls' t-shirt.

9. Get Rid Of Excess Stabilizer
Once you have created the beautiful embroidery design on your t-shirt, you should carefully remove the excess stabilizer. Some people have sensitive skin and they may face irritation due to thread and stabilizer. Thus, you should use the fusible tricot and cover the stabilizer.

10. Gently Press From Backside
Now, take a press cloth and start gently pressing your embroidery design from the backside. Gently pressing will help in releasing the hoop marks and wrinkles. The wrinkles appear on cloth due to handling. It is possible to remove these wrinkles by using the press cloth.


Also read about:
4 Reasons Why Tree Dies
Why Is Holi Celebrated History & Exact Meaning of HOLI
Your Five Step Guide to Getting a GIIS Sports Scholarship